| You will find below the various diagrams,
part lists, printed circuit plots, data sheets, instruction manuels and
guarantees of the most recent PSS units.
How to use this page
The amplifiers are listed by series (the serie is printed
on the PCB). Each series has its own indications. It is the denomination
in the series indicator that differentiates and determines the type
of amplifier you are looking for; this is why you will not find a 'clear'
direct reference to the name of your amplifier (e.g. SAP 2200). You
first have to find out to which series and which indicator your amplifier
belongs to. If your amplifier does not belong to one of the indicators
listed on this page, refer to the indicator that is nearest (for example,
for a 7-C amplifier series, you should refer to the 7-B series).
Determine to wich series an amplifier belongs
| Series 1 |
Amplifier built in a commercially available
housing (blue) |
| Series 2 |
LINEAR SYSTEM amplifiers,
models 1830 and 1848. |
| Series 3 |
LINEAR SYSTEM amplifiers,
model 1843. Anodised front panel in deep red. |
| Series 4 |
SAP 2160 - SAP 2300 amplifiers, lateral
heat sinks with horizontal vanes, 200 mm depth. |
| Series 5 |
Amplifiers with solid heat sinks on the
sides, depth 250 mm. |
| Series 6 |
Amplifier with the transformer/s projecting
out at the back, depth of casing 150 mm, longitudinal heat sink
in L shape. |
| Series 7 |
Amplifiers with the transformer/s projecting
out at the back, depth of the casing 200 mm, longitudinal heat sink
in U shape. |
| Series 8 |
Amplifier with ventilation drawing from
the back towards the front. Depth of the casing 250 mm (current
series). |
Amplifier series 1
Amplifier series 2 :
Amplifier series 3 :
- Part list
- Schematic
- PCB solder side
Amplifier series 4 :
Peak-meter SAP 2300 :
Amplifier series 5
Peak-meter 2U led (round):
Peak-meter 3U (round)
Peak-meter 4U (round)
Peak-meter 4U (strait)
Amplifier series 6
Amplifier series 7
You first have to find out to which series and which indicator your
amplifier belongs to. If your amplifier does not belong to one
of the indicators listed on this page, refer to the indicator that is
nearest (for example, for a 7-C amplifier series, you should refer to
the 7-E series).
Amplifier type 7-B1
Amplifier type 7-B2
Amplifier type 7-E1
Amplifier type 7-E2
Amplifier type 7-F
Amplifier type 7-G
Amplifier type 7-H
Amplifier type 7-I
Amplifier type 7-K
Amplifier type 7-L
Amplifier type 7-M
Amplifier series 8
You first have to find out to which series and which indicator your
amplifier belongs to. If your amplifier does not belong to one
of the indicators listed on this page, refer to the indicator that is
nearest.
Amplifier series 8-C2
Networks
- Components screen silk
- PB -
9 Kb
- PBPH
- PH -
22 Kb
- 2V -
25 Kb
- 3V -
20 Kb
- PCB solder side
- PB
- 10 Kb
- PBPH
- PH
- 21 Kb
- 2V
- 27 Kb
- 3V
- 21 Kb
Active crossovers
| Sex 2318-1 |
3 channels crossover. |
| Sex 2418 |
4 channels crossover. |
| SDM 2600 |
Electronic dispatcher. |
Crossover Sex 2318-1
Crossover Sex 2418
Electronic dispatcher SDM 2600
|
